All Isuzu Fleet drives Encee Electrical

Born and bred along the beaches of WA, Lincoln Walker, of Encee Electrical, comes off as a typically laid-back local. But dive a little deeper and his passion for the family’s electrical contracting company is crystal clear.

“I’ve been doing electrical work since I was about 10 years old. I’d work with my dad every holidays. I never had a part-time job. My job was working alongside Dad,” said Lincoln.

“I started my official apprenticeship in 1996 and joined him as a tradesman four years later. I’ve kept the business going since he passed in 2006.”

Since then, it’s been full steam ahead and Lincoln’s appreciation for their Isuzu NPS 4x4 truck fleet, loyally supporting two generations of Walkers and their staff is equally evident.

“We’re mostly involved with remote mining clients and a lot of WA’s big mobs. But we also do government road projects and we’ve done work on a couple of Australia’s biggest wind farms a few hundred kilometres north of Perth.

“We just couldn’t get by without 4x4 trucks working for hard us. We have to travel along gravel roads, and deal with a lot of soft sand on sites. We’re using the four-wheel-drive at least three or four times a week.”

Given Perth is considered one of the world’s windiest cities, with some of Australia’s best wind resources, it looks like Encee Electrical have a good thing going helping to connect WA to cleaner, greener energy.

Related reading:
Isuzu NPS 75/45-155 4x4: Review
Isuzu NPS 75-155 4x4 Servicepack: Review
Isuzu Traypack deals back on

“There’s so much infrastructure and construction out here, I’d say ever since COVID hit, we’ve been getting busier, and busier. It’s got crazy busy,” said Lincoln.

“We’d do about 35,000 kilometres a year in each truck now. Accounting for a lot of driving around town and down country highways… I’m glad our new manual transmission Isuzu has cruise control, I’d say it’s one of its best features, but that’s not really being fair,” Lincoln added with a grin.

“I was looking at another 12 months at least before upgrading my fleet, but with all this going on, and the instant asset write-off being offered… I knew we couldn’t go wrong upgrading this year instead.”

Space and the payload capacity of the fleets’ custom 4.5 metre steel tray bodies (fitted by TL Engineering) mean everything to Encee Electrical and their ability to get work done efficiently.

“Each truck has big toolboxes, a Kevrek 1500 crane on the back weighing around 200 kilos, and they can be pulling a 2.6 tonne trailer and excavator combo, not to mention the weight of our cable drums and switchboards.

“I’ve put about $10,000 worth of extras in there — genuine bullbar and spotlights, two-way radios, an aerial whip flag and REDARC electric brake controller and work lights.

“I need them capable of standing up to anything, which they’ve managed very well so far,” said Lincoln.

Most days Lincoln spends driving and working on site, and had apprehensions about fitting comfortably in the cab of medium-duty truck. Since purchasing Encee’s first Isuzu (a 2004 NPS 300 4x4) from Nestor Jongko at Major Motors, Forrestfield, through to their current 2016 and 2020 model NPS 75-155s, it’s been smooth sailing over the sand dunes.

“The 4x4s are only a little wider than a car, but surprisingly big inside,” he said.

“We also have space constraints on site, so the next truck size up is just too large, the NPS is perfect for what we need.”

“I like the appearance we present having an all-Isuzu fleet, including our D-Max Ute. Our customers know if you look after your truck, you’re going to put a bit more effort into looking after your work, too.

“And my kids think they’re kingpins when they rock up to school in the truck! All their friends make comments about it, so they love it,” Lincoln concluded.